Superior Systems & Installations1,Inc.

Description

Description

Amplifier Description

The 3.5kw competition series amplifier is a 3,500 watt mono block. It is capable of running up to 18 volts for up to 5,100 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.

It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground.

Output Power (RMS)

4 ohm 750Wx1 @ 14.4 Volts

2 ohm 1800Wx1 @ 14.4 Volts

1 ohm mono 3500×1 @ 14.4 Volts

1 ohm mono 4000×1 @ 16.0 Volts

1 ohm mono 5100×1 @ 18.0 Volts

Key Features

• 1 ohm stable

• Variable low pass filter

• Variable subsonic filter

• Variable bass boost

• Wired Bass Knob remote control W/ Clip light

• RCA Pass Thru

• Linkable

Recommended for installation :

Upgraded Alternator or 220 amps of charging power

Upgraded under hood Battery

450ah of AGM Batteries in the trunk or 60ah Lithium

Dash mounted voltage meter

0 Awg OFC power and ground

Power & ground runs from front to back batteries.

DO NOT mount to subwoofer box. (will void warranty)

AMP SPECS:

DC Amp Model: 3.5k
Input Sensitivity 6V~0.2V
Frequency Response 20Hz~250Hz
24dB / Octave Crossover YES
Low Pass 35Hz ~ 250Hz
Subsonic Filter 10Hz-50hz
Bass Boost @45hz 0 ~ 9db
Phase Shift 0 ~ 180
Remote Control Yes
Clip Indicator Yes
Signal to Noise Ratio dB100
Damping Factor 200< THD @ 4ohms Less than 0.1% Fuse Rating External 350 amp LED Status Lights Power and Protect Master/Slave YES Heatsink Length 21.26"/540mm Heatsink Width 9.38"/66mm Heatsink Width 2.35"/59.6mm