Superior Systems & Installations1,Inc.

Description

Description

Amplifier Description

The 2.0kw competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator.

For power inputs it will accept 0 awg for power and 0 awg for ground.

Output Power (RMS)

4 ohm 600Wx1 @ 14.4 Volts

2 ohm 1200Wx1 @ 14.4 Volts

1 ohm mono 2000×1 @ 14.4 Volts

Key Features

• 1 ohm stable

• Variable low pass filter

• Variable subsonic filter

• Variable bass boost

• Wired Bass Knob remote control W/ Clip light

• RCA Pass Thru

• Linkable

Recommended for installation :

Upgraded Alternator or 125 amps of charging power

Upgraded under hood Battery

200ah of AGM Batteries in the trunk or 20ah Lithium

Dash mounted voltage meter

0 Awg OFC power and ground

Power & ground runs from front to back batteries.

DO NOT mount to subwoofer box. (will void warranty)

AMP SPECS:

DC Amp Model: 2.0k
Input Sensitivity 6V~0.2V
Frequency Response 20Hz~250Hz
24dB / Octave Crossover YES
Low Pass 35Hz ~ 250Hz
Subsonic Filter 10Hz-50hz
Bass Boost @45hz 0 ~ 9db
Phase Shift 0 ~ 180
Remote Control Yes
Clip Indicator Yes
Signal to Noise Ratio dB100
Damping Factor 200< THD @ 4ohms Less than 0.1% Fuse Rating External 200 amp LED Status Lights Power and Protect Master/Slave YES Heatsink Length 17.72"/450mm Heatsink Width 9.38"/238mm Heatsink Height 2.35"/59.6mm