Superior Systems & Installations1,Inc.

Description

Description

Amplifier Description

The Pitbull 20k competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It’s built with the best of the Best parts from the Mosfets to the Large Tiffany Jacks.

It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

Output Power (RMS)

4 ohm 5000Wx1 @ 14.4 Volts

2 ohm 7500Wx1 @ 14.4 Volts

1 ohm mono 20,000×1 @ 14.4 Volts

DO NOT CHARGE OVER 15.5Volts

Key Features

• 1 ohm stable

• Variable low pass filter

• Variable subsonic filter

• Variable bass boost

• Wired Bass Knob remote control W/ Clip Light

• RCA Pass Thru

• Triple 0 Awg Power Ground Inputs

Recommended for installation :

2 Upgraded Alternators or 450 amps of charging power

Upgraded under hood Battery

2000ah of AGM Batteries in the trunk or 240ah Lithium

Dash mounted voltage meter

0 Awg OFC power and ground

Power & ground runs from front to back batteries.

DO NOT mount to subwoofer box. (will void warranty)

AMP SPECS:

DC Amp Model: Pitbull 20k
Input Sensitivity 6V~0.2V
Frequency Response 15Hz~270Hz
24dB / Octave Crossover YES
Low Pass 35Hz ~ 250Hz
Subsonic Filter 10Hz-50hz
Bass Boost @45hz 0 ~ 9db
Phase Shift 0 ~ 180
Remote Control Yes
Clip Indicator Yes
Signal to Noise Ratio dB100
Damping Factor 150< THD @ 4ohms Less than 0.1% Fuse Rating External 660 amp x 3 LED Status Lights Power and Protect Master/Slave No Heatsink Length 37.75"/958mm Heatsink Width 11.5"/292mm Heatsink Height 2.6"/66mm